Salt-Tolerant Crops: What to Grow When Soil or Irrigation Water Is Saline
When soil or irrigation water carries too much salt, choosing the right crop can be as important as treating the field. Crops vary widely in how much salinity they can handle before yields fall. This guide from Universal Agriculture explains how salt tolerance is measured, gives examples across the tolerance range and describes practices that help any crop perform better on salt-affected ground.
How salt tolerance is measured
Soil salinity is usually reported as the electrical conductivity of a saturated soil paste extract (ECe), in deciSiemens per meter (dS/m). Researchers, including scientists at the USDA Agricultural Research Service's U.S. Salinity Laboratory, have measured how yields respond to rising salinity. For most crops there is a threshold, the salinity level at which yields begin to decline, and a slope, how quickly yields fall above that threshold. Crops are then grouped as sensitive, moderately sensitive, moderately tolerant or tolerant.
These figures come from controlled studies, so treat them as a guide. Actual performance depends on variety, climate, irrigation practice, growth stage and soil type. Seedlings are often more sensitive than established plants.
Examples across the tolerance range
- Sensitive: beans, carrots, onions, strawberries and many fruit trees, such as citrus, almonds and stone fruit.
- Moderately sensitive: corn, alfalfa, potatoes, tomatoes, peppers, lettuce and many vegetables.
- Moderately tolerant: wheat, sorghum, soybeans (variety-dependent), beets and some forage grasses.
- Tolerant: barley, cotton, sugar beets, bermudagrass and some wheatgrasses.
Varieties within a crop can differ considerably, and breeders continue to release more salt-tolerant lines. Ask your seed supplier or local extension office for varieties tested in your region.
Start with a test
Crop choice should be based on measured salinity, not guesswork. A soil test with ECe, sodium adsorption ratio (SAR) and exchangeable sodium percentage tells you whether the problem is salinity, sodicity or both. Our guides on soil salinity signs and testing and on irrigation water quality (EC and SAR) explain what to measure and how to read the results. If sodium is the main issue, see gypsum or sulfur for sodic soils.
Field practices that help
- Leaching: applying extra water beyond what the crop uses moves salts below the root zone, provided drainage is adequate.
- Irrigation method: drip and frequent, lighter irrigation keep the root zone moister and can limit salt buildup near roots. Sprinkling saline water on leaves can injure sensitive crops.
- Bed and seed placement: salts tend to accumulate at the highest point of a bed as water evaporates. Placing seed on the shoulder or using sloped beds can keep seedlings out of the saltiest zone.
- Drainage: a high or saline water table brings salt back up. Improving drainage is often a prerequisite for lasting improvement.
- Residue and organic matter: mulch reduces surface evaporation, and organic matter improves soil structure and water movement.
- Rotation: starting with a tolerant crop while the field is reclaimed, then moving toward more sensitive, higher-value crops as salinity falls.
Economics of switching crops
A tolerant crop that yields fully can be worth more than a sensitive crop that loses a third of its yield, but only if there is a market for it. Before switching, check buyer demand, contract options, equipment needs and storage. Growers can find buyers for many crops through CropListing, a free farmer-to-buyer crop marketplace.
Common questions
Can a sensitive crop be grown on saline soil?
Sometimes, with careful management such as leaching, drip irrigation and good drainage, but yields usually suffer if root-zone salinity stays above the crop's threshold. Testing and reclamation come first.
Is salt tolerance the same as drought tolerance?
No. Some crops tolerate both, but they are different traits. Salinity makes it harder for roots to take up water and can cause specific ion toxicity, while drought is a shortage of water itself.
How quickly can a saline field be improved?
With good drainage and sufficient leaching water, salinity can fall within one or more seasons. Sodic soils and fields with poor drainage usually take longer and may need amendments.
Where Salt Fighter fits
Universal Agriculture's services include soil salinity assessment, custom soil amendment solutions, including our proprietary Salt Fighter blend, fertilizer application support and sustainable farming consultation. We start with your test results and field conditions, then recommend a site-specific plan that combines crop choice, water management and soil treatment. Ask us about Salt Fighter for your fields.
This article is general agronomic information. Salt tolerance ratings are approximate and vary with variety, climate and management; follow recommendations from a soil laboratory, your local extension service or a qualified agronomist.